Product Overview
The Driveshaft Assembly is supplied for selected passenger cars, SUVs, pickups and light commercial vehicles. Product specifications can be confirmed against OE references, technical drawings or approved samples, including shaft dimensions, joint types, flanges, yokes and spline configurations. The assembly can be supplied for replacement and vehicle-specific applications.
Key Specifications
|
Specification |
Details |
|
Product Type |
Driveshaft / propeller shaft assembly |
|
Application |
Passenger cars, SUVs, pickups and light commercial vehicles |
|
Drivetrain |
RWD, 4WD / AWD |
|
Configuration |
One-piece, two-piece or multi-piece |
|
Overall Length |
500–3,500 mm, flange-to-flange |
|
Tube Diameter |
60 / 76 / 89 / 101 mm, where applicable |
|
Tube Wall Thickness |
2.5–5.0 mm, depending on shaft design |
|
Tube Material |
Alloy steel, grade specified by application |
|
Joint Type |
Universal joint, CV joint or specified joint type |
|
Flange |
Application-specific flange design |
|
Yoke |
Fixed yoke, slip yoke or specified design |
|
Spline |
Internal or external spline, as specified |
|
Mounting Pattern |
OE- or drawing-based bolt pattern |
|
Balancing |
Dynamic balancing according to shaft configuration |
|
Surface Treatment |
Black anti-corrosion coating or specified finish |
|
Assembly |
Factory assembled to approved specification |
Application & Fitment
Fitment is confirmed according to the vehicle application, drivetrain, shaft position, transmission and OE reference provided by the buyer. Technical drawings or approved samples can also be used for application verification when required.
|
Specification |
Fitment Information |
|
Vehicle Make |
Application-specific |
|
Vehicle Model |
Application-specific |
|
Model Year |
Application-specific |
|
Drivetrain |
RWD / 4WD / AWD |
|
Shaft Position |
Front / Rear / Intermediate |
|
Transmission |
Manual / Automatic, where applicable |
|
OE Reference |
Used for application and fitment verification |
|
Wheelbase |
Where applicable |
Configuration & Balancing
Main Components
Depending on the application, the driveshaft assembly may include a steel tube, fixed or slip yoke, flange or companion flange, universal or CV joints, spline shaft, center support bearing, rubber boots, grease and balance weights.
Joint & Shaft Configuration
Joint type, yoke design, spline configuration and center support arrangement are selected according to the vehicle drivetrain, shaft position and installation requirements.
Dynamic Balancing
Dynamic balancing requirements are determined by shaft configuration and operating conditions. Balance condition is verified after assembly, while shaft runout is checked during dimensional and assembly inspection.
Manufacturing & Quality Control
Dimensional Inspection
Key dimensions are checked against approved drawings, OE references or product specifications, including overall length, tube diameter, wall thickness, flange dimensions, bolt-hole pattern, spline dimensions and shaft runout.
Inspection Equipment
Inspection is supported by CMM, dynamic balancing equipment, runout measurement tools, vernier calipers and micrometers, as applicable.
Assembly Inspection
Joint installation, yoke position, flange orientation, fasteners and other assembly interfaces are checked against the approved configuration.
Sample Approval
For new or customized applications, specifications can be confirmed against an approved sample, technical drawing or OE reference before production.
Final Inspection
Finished assemblies are checked for appearance, key dimensions and assembly condition before packing and shipment.
Inspection Records
Inspection records can be maintained according to product and customer requirements.
FAQ
Q: What is the typical production lead time for a driveshaft order?
A: Standard production typically takes 20–30 days, depending on the product configuration and order quantity. The confirmed lead time is provided with the quotation or order confirmation.
Q: Can you arrange samples before a bulk order?
A: Yes. Samples can be arranged for pre-production evaluation. Sample requirements and timing are confirmed based on the application and quantity required.
Q: Do you support repeat orders for existing driveshaft programs?
A: Yes. Repeat orders can be produced against the previously approved specification or customer reference to maintain consistency between orders.
Q: Can multiple SKUs be included in the same order?
A: Yes. Multiple product references can be combined in one purchasing program. Production scheduling depends on the number of SKUs, quantities and required delivery date.
Q: Can packaging and labeling be prepared for aftermarket distribution?
A: Yes. Carton markings, product labels and customer-specific packaging can be prepared according to the agreed packaging requirements.
Q: Can you support urgent or scheduled delivery requirements?
A: Requested delivery dates can be reviewed before order confirmation. The production schedule is agreed according to the product configuration, order quantity and delivery requirement.
Hot Tags: driveshaft shaft drive, China driveshaft shaft drive manufacturers, suppliers, factory, drive shaft, Drive Shaft for 2013 G3 Byd, Drive Shaft For Corolla 26 23 920MM, DRIVE SHAFT FOR COROLLA IM, Drive Shaft for ford Mondeo, Drive Shaft for Toyota Alphard